Freight Car Models – Page 16 – Notes on Designing, Building, and Operating Model Railroads

Upgrading Plastic – MTH USRA hoppers

Dave Parker returns with his techniques to upgrade the MTH HO scale USRA hoppers.

About three years ago, I purchased an MTH ready-to-run USRA twin hopper with the intention of kit-bashing it into a Boston & Maine car. The B&M bought 100 used twins from the C&O in late 1934 but, after squinting at several photos, I decided it was a no-go. The C&O cars were USRA-like, but had noticeable differences in overall structure and in the details. The MTH car came lettered for the Erie, and can be seen in the 1920s plastic freight car summary, but it is a foobie – the Erie never owned any USRA twins.

Continue reading “Upgrading Plastic – MTH USRA hoppers”

New Haven steel coal gondolas

Fellow Pre-Depression Era modeler Dave Parker has sent notes on a recent resin freight car kit build. Click on any image here to review a larger size. Here’s Dave’s story.

In 1929, the New York, New Haven and Hartford received 500 class GA-2 gondolas from the Pressed Steel Car Company. These all-steel, drop-bottom gons had an inside length of 40 feet, and were numbered in the 58000-58499 series. Based on my collection of Official Registers, 496 remained in service as of 1945, but by 1955 this number had dwindled to 276 cars, and all had been rebuilt as solid-floor cars (GB classification). At some intermediate date, probably about 1950, the 58000 series apparently contained a mix of original and rebuilt cars, but I do not own an ORER that gives the exact numbers.

Continue reading “New Haven steel coal gondolas”

Truck Installation tips

This sounds pretty simple, right? I mean, you just turn the screw until it’s tight and then turn it back a quarter or a half turn so the truck pivots and rocks side to side. Sure, that is the way I had installed freight car trucks for years until a truck wouldn’t pivot well or I stripped out the threads in the hole.

Continue reading “Truck Installation tips”

Beyond the Box

We wish it were as easy as opening a box to add a new freight car on the layout. Here are a few processes to transform a kit to a completed freight car ready for service.

Readers may have noticed most of my freight cars go through a few phases as they progress from parts in a kit box to layout use with a weathered patina. These construction phases are common for many prototype modelers as we customize basic freight car kits, or ready-to-run models (RTR), in order to reflect a specific prototype or era. Let’s take a look at these phases.

Continue reading “Beyond the Box”

Decal techniques

I see quite a few questions about applying decals on discussion lists and in private emails that arrive. There is a fear of failure for many modelers in the decal application process. I know this anxiety. It had a hold of me for awhile as I believed I would mess up the job. Let’s review techniques that helped me work towards a solid final appearance.

Continue reading “Decal techniques”