brake details – Notes on Designing, Building, and Operating Model Railroads

Brake rods

I’ve been building several HO scale resin freight car kits over the last several months. I’ve always had a problem determining the length of the center rod on the brake gear. I figured out a simple way to make these the correct length. I know if I’ve had a problem with a modeling detail, others have also experienced a similar issue.

The extra stuff

Many freight car kits include a parts fret for brake hardware. Resin kits often include a Tichy Train Group parts fret seen in the above image. After I use the KC brake component and a couple other pieces, the fret becomes extra stuff. Once you have gone through several of these, they start taking up space.

Installing KD brake hardware on hoppers

A few steel hopper models have been progressing on my workbench. Each of them requires KD brake components. As I worked on these, I realized it’s been a while since a step-by-step illustration of the process has been published. This post will summarize the three methods I’m using on these models.